U.S. Code, Title 15, Chapter 6, Subchapter III, Sec. 206.
Standard gauge for sheet and plate iron and steel
For the purpose of securing uniformity the following is established as the only standard gauge for sheet and plate iron and steel in the United States of America, namely:
| Thickness | Weight | |||||||
|---|---|---|---|---|---|---|---|---|
| Gauge | Frac. Inch | Dec. Inch | mm | oz/ft^2 | lb/ft^2 | kg/ft^2 | kg/m^2 | lb/m^2 |
| 0000000 | 1/2 | .5 | 12.7 | 320 | 20.00 | 9.072 | 97.65 | 215.28 |
| 000000 | 15/32 | .46875 | 11.90625 | 300 | 18.75 | 8.505 | 91.55 | 201.82 |
| 00000 | 7/16 | .4375 | 11.1125 | 280 | 17.50 | 7.983 | 85.44 | 188.37 |
| 0000 | 13/32 | .40625 | 10.31875 | 260 | 16.25 | 7.371 | 79.33 | 174.91 |
| 000 | 3/8 | .375 | 9.525 | 240 | 15 | 6.804 | 73.24 | 161.46 |
| 00 | 11/32 | .34375 | 8.73125 | 220 | 13.75 | 6.237 | 67.13 | 148.00 |
| 0 | 5/16 | .3125 | 7.9375 | 200 | 12.50 | 5.67 | 61.03 | 134.55 |
| 1 | 9/32 | .28125 | 7.14375 | 180 | 11.25 | 5.103 | 54.93 | 121.09 |
| 2 | 17/64 | .265625 | 6.746875 | 170 | 10.625 | 4.819 | 51.88 | 114.37 |
| 3 | 1/4 | .25 | 6.35 | 160 | 10 | 4.536 | 48.82 | 107.64 |
| 4 | 15/64 | .234375 | 5.953125 | 150 | 9.375 | 4.252 | 45.77 | 100.91 |
| 5 | 7/32 | .21875 | 5.55625 | 140 | 8.75 | 3.969 | 42.72 | 94.18 |
| 6 | 13/64 | .203125 | 5.159375 | 130 | 8.125 | 3.685 | 39.67 | 87.45 |
| 7 | 3/16 | .1875 | 4.7625 | 120 | 7.5 | 3.402 | 36.62 | 80.72 |
| 8 | 11/64 | .171875 | 4.365625 | 110 | 6.875 | 3.118 | 33.57 | 74.00 |
| 9 | 5/32 | .15625 | 3.96875 | 100 | 6.25 | 2.835 | 30.52 | 67.27 |
| 10 | 9/64 | .140625 | 3.571875 | 90 | 5.625 | 2.552 | 27.46 | 60.55 |
| 11 | 1/8 | .125 | 3.175 | 80 | 5 | 2.268 | 24.41 | 53.82 |
| 12 | 7/64 | .109375 | 2.778125 | 70 | 4.375 | 1.984 | 21.36 | 47.09 |
| 13 | 3/32 | .09375 | 2.38125 | 60 | 3.75 | 1.701 | 18.31 | 40.36 |
| 14 | 5/64 | .078125 | 1.984375 | 50 | 3.125 | 1.417 | 15.26 | 33.64 |
| 15 | 9/128 | .0703125 | 1.7859375 | 45 | 2.8125 | 1.276 | 13.73 | 30.27 |
| 16 | 1/16 | .0625 | 1.5875 | 40 | 2.5 | 1.134 | 12.21 | 26.91 |
| 17 | 9/160 | .05625 | 1.42875 | 36 | 2.25 | 1.021 | 10.99 | 24.22 |
| 18 | 1/20 | .05 | 1.27 | 32 | 2 | .9072 | 9.765 | 21.53 |
| 19 | 7/160 | .04375 | 1.11125 | 28 | 1.75 | .7938 | 8.544 | 18.84 |
| 20 | 3/80 | .0375 | .9525 | 24 | 1.50 | .6804 | 7.324 | 16.15 |
| 21 | 11/320 | .034375 | .873125 | 22 | 1.375 | .6237 | 6.713 | 14.80 |
| 22 | 1/32 | .03125 | .793750 | 20 | 1.25 | .567 | 6.103 | 13.46 |
| 23 | 9/320 | .028125 | .714375 | 18 | 1.125 | .5103 | 5.493 | 12.11 |
| 24 | 1/40 | .025 | .635 | 16 | 1 | .4536 | 4.882 | 10.76 |
| 25 | 7/320 | .021875 | .555625 | 14 | .875 | .3969 | 4.272 | 9.42 |
| 26 | 3/160 | .01875 | .47625 | 12 | .75 | .3402 | 3.662 | 8.07 |
| 27 | 11/640 | .0171875 | .4365625 | 11 | .6875 | .3119 | 3.357 | 7.40 |
| 28 | 1/64 | .015625 | .396875 | 10 | .625 | .2835 | 3.052 | 6.73 |
| 29 | 9/640 | .0140625 | .3571875 | 9 | .5625 | .2551 | 2.746 | 6.05 |
| 30 | 1/80 | .0125 | .3175 | 8 | .5 | .2268 | 2.441 | 5.38 |
| 31 | 7/640 | .0109375 | .2778125 | 7 | .4375 | .1984 | 2.136 | 4.71 |
| 32 | 13/1280 | .01015625 | .25796875 | 6 1/2 | .40625 | .1843 | 1.983 | 4.37 |
| 33 | 3/320 | .009375 | .238125 | 6 | .375 | .1701 | 1.831 | 4.04 |
| 34 | 11/1280 | .00859375 | .21828125 | 5 1/2 | .34375 | .1559 | 1.678 | 3.70 |
| 35 | 5/640 | .0078125 | .1984375 | 5 | .3125 | .1417 | 1.526 | 3.36 |
| 36 | 9/1280 | .00703125 | .17859375 | 4 1/2 | .28125 | .1276 | 1.373 | 3.03 |
| 37 | 17/2560 | .006640625 | .168671875 | 4 1/4 | .265625 | .1205 | 1.297 | 2.87 |
| 38 | 1/160 | .00625 | .15875 | 4 | .25 | .1134 | 1.221 | 2.69 |
The same and no other shall be used in determining duties and taxes levied by the United States of America on sheet and plate iron and steel. But this subchapter shall not be construed to increase duties upon any articles which may be imported.
Reformatted from: http://www4.law.cornell.edu/uscode/15/206.html
